diff --git a/nixos/doc/manual/from_md/release-notes/rl-2205.section.xml b/nixos/doc/manual/from_md/release-notes/rl-2205.section.xml index 2875ea683f8f..35a9c5d16b0e 100644 --- a/nixos/doc/manual/from_md/release-notes/rl-2205.section.xml +++ b/nixos/doc/manual/from_md/release-notes/rl-2205.section.xml @@ -391,13 +391,49 @@ - The interface that allows activation scripts to restart units - has been reworked. Restarting and reloading is now done by a - single file - /run/nixos/activation-restart-list that - honors restartIfChanged and - reloadIfChanged of the units. + switch-to-configuration (the script that is + run when running nixos-rebuild switch for + example) has been reworked + + + + The interface that allows activation scripts to restart + units has been streamlined. Restarting and reloading is + now done by a single file + /run/nixos/activation-restart-list that + honors restartIfChanged and + reloadIfChanged of the units. + + + + + The script now uses a proper ini-file parser to parse + systemd units. Some values are now only searched in one + section instead of in the entire unit. This is only + relevant for units that don’t use the NixOS systemd moule. + + + + + RefuseManualStop, + X-OnlyManualStart, + X-StopOnRemoval, + X-StopOnReconfiguration are only + searched in the [Unit] section + + + + + X-ReloadIfChanged, + X-RestartIfChanged, + X-StopIfChanged are only searched + in the [Service] section + + + + + diff --git a/nixos/doc/manual/release-notes/rl-2205.section.md b/nixos/doc/manual/release-notes/rl-2205.section.md index a59513adfc92..078ebed5f138 100644 --- a/nixos/doc/manual/release-notes/rl-2205.section.md +++ b/nixos/doc/manual/release-notes/rl-2205.section.md @@ -124,7 +124,11 @@ In addition to numerous new and upgraded packages, this release has the followin `pkgs.noto-fonts-cjk` is currently an alias of `pkgs.noto-fonts-cjk-sans` and doesn't include serif fonts. -- The interface that allows activation scripts to restart units has been reworked. Restarting and reloading is now done by a single file `/run/nixos/activation-restart-list` that honors `restartIfChanged` and `reloadIfChanged` of the units. +- `switch-to-configuration` (the script that is run when running `nixos-rebuild switch` for example) has been reworked + * The interface that allows activation scripts to restart units has been streamlined. Restarting and reloading is now done by a single file `/run/nixos/activation-restart-list` that honors `restartIfChanged` and `reloadIfChanged` of the units. + * The script now uses a proper ini-file parser to parse systemd units. Some values are now only searched in one section instead of in the entire unit. This is only relevant for units that don't use the NixOS systemd moule. + * `RefuseManualStop`, `X-OnlyManualStart`, `X-StopOnRemoval`, `X-StopOnReconfiguration` are only searched in the `[Unit]` section + * `X-ReloadIfChanged`, `X-RestartIfChanged`, `X-StopIfChanged` are only searched in the `[Service]` section - The `services.bookstack.cacheDir` option has been removed, since the cache directory is now handled by systemd. diff --git a/nixos/modules/system/activation/switch-to-configuration.pl b/nixos/modules/system/activation/switch-to-configuration.pl index 93fff889d6bc..c51ae5d54fc2 100644 --- a/nixos/modules/system/activation/switch-to-configuration.pl +++ b/nixos/modules/system/activation/switch-to-configuration.pl @@ -2,6 +2,7 @@ use strict; use warnings; +use Config::IniFiles; use File::Path qw(make_path); use File::Basename; use File::Slurp; @@ -113,26 +114,85 @@ sub parseFstab { return ($fss, $swaps); } +# This subroutine takes a single ini file that specified systemd configuration +# like unit configuration and parses it into a hash where the keys are the sections +# of the unit file and the values are hashes themselves. These hashes have the unit file +# keys as their keys (left side of =) and an array of all values that were set as their +# values. If a value is empty (for example `ExecStart=`), then all current definitions are +# removed. +# +# Instead of returning the hash, this subroutine takes a hashref to return the data in. This +# allows calling the subroutine multiple times with the same hash to parse override files. +sub parseSystemdIni { + my ($unitContents, $path) = @_; + # Tie the ini file to a hash for easier access + my %fileContents; + tie %fileContents, "Config::IniFiles", (-file => $path, -allowempty => 1, -allowcontinue => 1); + + # Copy over all sections + foreach my $sectionName (keys %fileContents) { + # Copy over all keys + foreach my $iniKey (keys %{$fileContents{$sectionName}}) { + # Ensure the value is an array so it's easier to work with + my $iniValue = $fileContents{$sectionName}{$iniKey}; + my @iniValues; + if (ref($iniValue) eq "ARRAY") { + @iniValues = @{$iniValue}; + } else { + @iniValues = $iniValue; + } + # Go over all values + for my $iniValue (@iniValues) { + # If a value is empty, it's an override that tells us to clean the value + if ($iniValue eq "") { + delete $unitContents->{$sectionName}->{$iniKey}; + next; + } + push(@{$unitContents->{$sectionName}->{$iniKey}}, $iniValue); + } + } + } + return; +} + +# This subroutine takes the path to a systemd configuration file (like a unit configuration), +# parses it, and returns a hash that contains the contents. The contents of this hash are +# explained in the `parseSystemdIni` subroutine. Neither the sections nor the keys inside +# the sections are consistently sorted. +# +# If a directory with the same basename ending in .d exists next to the unit file, it will be +# assumed to contain override files which will be parsed as well and handled properly. sub parseUnit { - my ($filename) = @_; - my $info = {}; - parseKeyValues($info, read_file($filename)) if -f $filename; - parseKeyValues($info, read_file("${filename}.d/overrides.conf")) if -f "${filename}.d/overrides.conf"; - return $info; + my ($unitPath) = @_; + + # Parse the main unit and all overrides + my %unitData; + parseSystemdIni(\%unitData, $_) for glob("${unitPath}{,.d/*.conf}"); + return %unitData; } sub parseKeyValues { my $info = shift; foreach my $line (@_) { - # FIXME: not quite correct. $line =~ /^([^=]+)=(.*)$/ or next; $info->{$1} = $2; } } -sub boolIsTrue { - my ($s) = @_; - return $s eq "yes" || $s eq "true"; +# Checks whether a specified boolean in a systemd unit is true +# or false, with a default that is applied when the value is not set. +sub parseSystemdBool { + my ($unitConfig, $sectionName, $boolName, $default) = @_; + + my @values = @{$unitConfig->{$sectionName}{$boolName} // []}; + # Return default if value is not set + if (scalar @values lt 1 || not defined $values[-1]) { + return $default; + } + # If value is defined multiple times, use the last definition + my $last = $values[-1]; + # These are valid values as of systemd.syntax(7) + return $last eq "1" || $last eq "yes" || $last eq "true" || $last eq "on"; } sub recordUnit { @@ -167,17 +227,17 @@ sub handleModifiedUnit { # Revert of the attempt: https://github.com/NixOS/nixpkgs/pull/147609 # More details: https://github.com/NixOS/nixpkgs/issues/74899#issuecomment-981142430 } else { - my $unitInfo = parseUnit($newUnitFile); - if (boolIsTrue($unitInfo->{'X-ReloadIfChanged'} // "no")) { + my %unitInfo = parseUnit($newUnitFile); + if (parseSystemdBool(\%unitInfo, "Service", "X-ReloadIfChanged", 0)) { $unitsToReload->{$unit} = 1; recordUnit($reloadListFile, $unit); } - elsif (!boolIsTrue($unitInfo->{'X-RestartIfChanged'} // "yes") || boolIsTrue($unitInfo->{'RefuseManualStop'} // "no") || boolIsTrue($unitInfo->{'X-OnlyManualStart'} // "no")) { + elsif (!parseSystemdBool(\%unitInfo, "Service", "X-RestartIfChanged", 1) || parseSystemdBool(\%unitInfo, "Unit", "RefuseManualStop", 0) || parseSystemdBool(\%unitInfo, "Unit", "X-OnlyManualStart", 0)) { $unitsToSkip->{$unit} = 1; } else { # It doesn't make sense to stop and start non-services because # they can't have ExecStop= - if (!boolIsTrue($unitInfo->{'X-StopIfChanged'} // "yes") || $unit !~ /\.service$/) { + if (!parseSystemdBool(\%unitInfo, "Service", "X-StopIfChanged", 1) || $unit !~ /\.service$/) { # This unit should be restarted instead of # stopped and started. $unitsToRestart->{$unit} = 1; @@ -188,7 +248,7 @@ sub handleModifiedUnit { # socket(s) instead of the service. my $socketActivated = 0; if ($unit =~ /\.service$/) { - my @sockets = split / /, ($unitInfo->{Sockets} // ""); + my @sockets = split(/ /, join(" ", @{$unitInfo{Service}{Sockets} // []})); if (scalar @sockets == 0) { @sockets = ("$baseName.socket"); } @@ -254,12 +314,12 @@ while (my ($unit, $state) = each %{$activePrev}) { if (-e $prevUnitFile && ($state->{state} eq "active" || $state->{state} eq "activating")) { if (! -e $newUnitFile || abs_path($newUnitFile) eq "/dev/null") { - my $unitInfo = parseUnit($prevUnitFile); - $unitsToStop{$unit} = 1 if boolIsTrue($unitInfo->{'X-StopOnRemoval'} // "yes"); + my %unitInfo = parseUnit($prevUnitFile); + $unitsToStop{$unit} = 1 if parseSystemdBool(\%unitInfo, "Unit", "X-StopOnRemoval", 1); } elsif ($unit =~ /\.target$/) { - my $unitInfo = parseUnit($newUnitFile); + my %unitInfo = parseUnit($newUnitFile); # Cause all active target units to be restarted below. # This should start most changed units we stop here as @@ -268,7 +328,7 @@ while (my ($unit, $state) = each %{$activePrev}) { # active after the system has resumed, which probably # should not be the case. Just ignore it. if ($unit ne "suspend.target" && $unit ne "hibernate.target" && $unit ne "hybrid-sleep.target") { - unless (boolIsTrue($unitInfo->{'RefuseManualStart'} // "no") || boolIsTrue($unitInfo->{'X-OnlyManualStart'} // "no")) { + unless (parseSystemdBool(\%unitInfo, "Unit", "RefuseManualStart", 0) || parseSystemdBool(\%unitInfo, "Unit", "X-OnlyManualStart", 0)) { $unitsToStart{$unit} = 1; recordUnit($startListFile, $unit); # Don't spam the user with target units that always get started. @@ -287,7 +347,7 @@ while (my ($unit, $state) = each %{$activePrev}) { # Stopping a target generally has no effect on other units # (unless there is a PartOf dependency), so this is just a # bookkeeping thing to get systemd to do the right thing. - if (boolIsTrue($unitInfo->{'X-StopOnReconfiguration'} // "no")) { + if (parseSystemdBool(\%unitInfo, "Unit", "X-StopOnReconfiguration", 0)) { $unitsToStop{$unit} = 1; } } diff --git a/nixos/modules/system/activation/top-level.nix b/nixos/modules/system/activation/top-level.nix index 1c588ff96918..0f26aaf72ec1 100644 --- a/nixos/modules/system/activation/top-level.nix +++ b/nixos/modules/system/activation/top-level.nix @@ -119,7 +119,7 @@ let configurationName = config.boot.loader.grub.configurationName; # Needed by switch-to-configuration. - perl = pkgs.perl.withPackages (p: with p; [ FileSlurp NetDBus XMLParser XMLTwig ]); + perl = pkgs.perl.withPackages (p: with p; [ FileSlurp NetDBus XMLParser XMLTwig ConfigIniFiles ]); }; # Handle assertions and warnings