It's already defined in `systemd/user.nix`.
This is a leftover from commit b6d50528dd
where all `systemd.user` settings were moved to `systemd/user.nix`.
using freeform is the new standard way of using modules and should replace
extraConfig.
In particular, this will allow us to place a condition on mails
This accomplishes multiple things:
- Allows us to start systemd without stage-2-init.sh. This was not
possible before because the environment would have been wrong
- `systemctl daemon-reexec` also changes the environment, giving us
newer tools for the fs packages
- Starts systemd in a fully clean environment, making everything more
consistent and pure
wtmp and btmp are created by systemd, so the rules are more appropriate there.
They can be disabled explicitly with something like
services.ogrotate.paths = {
"/var/log/btmp".enable = false;
"/var/log/wtmp".enable = false;
};
if required.
Add `shellDryRun` to the generic stdenv and substitute it for uses of
`${stdenv.shell} -n`. The point of this layer of abstraction is to add
the flag `-O extglob`, which resolves#126344 in a more direct way.
/etc/crypttab can contain the _netdev option, which adds crypto devices
to the remote-cryptsetup.target.
remote-cryptsetup.target has a dependency on cryptsetup-pre.target. So
let's add both of them.
Currently, one needs to manually ssh in and invoke `systemctl start
systemd-cryptsetup@<name>.service` to unlock volumes.
After this change, systemd will properly add it to the target, and
assuming remote-cryptsetup.target is pulled in somewhere, you can simply
pass the passphrase by invoking `systemd-tty-ask-password-agent` after
ssh-ing in, without having to manually start these services.
Whether remote-cryptsetup.target should be added to multi-user.target
(as it is on other distros) is part of another discussion - right now
the following snippet will do:
```
systemd.targets.multi-user.wants = [ "remote-cryptsetup.target" ];
```
Fixes:
```
activating the configuration...
warning: user ‘systemd-coredump’ has unknown group ‘systemd-coredump’
setting up /etc...
```
Oversight of #133166
The main goal of this commit is to replace the rather fragile passing of
multiple arrays which could break in cases like #130935.
While I could have just added proper shell escaping to the variables
being passed, I opted for the more painful approach of replacing the
fragile and somewhat strange construct with the 5 bash lists. While
there are currently no more problems present with the current approach
(at least none that I know of), the new approach seems more solid and
might get around problems that could arise in the future stemming from
either the multiple-lists situation or from the absence of proper shell
quoting all over the script.
systemd-coredump tries to drop privileges to a systemd-coredump user if
present (and falls back to the root user if it's not available).
Create that user, and recycle uid 151 for it. We don't really care about
the gid.
Fixes https://github.com/NixOS/nixpkgs/issues/120803.
- The order of NSS (host) modules has been brought in line with upstream
recommendations:
- The `myhostname` module is placed before the `resolve` (optional) and `dns`
entries, but after `file` (to allow overriding via `/etc/hosts` /
`networking.extraHosts`, and prevent ISPs with catchall-DNS resolvers from
hijacking `.localhost` domains)
- The `mymachines` module, which provides hostname resolution for local
containers (registered with `systemd-machined`) is placed to the front, to
make sure its mappings are preferred over other resolvers.
- If systemd-networkd is enabled, the `resolve` module is placed before
`files` and `myhostname`, as it provides the same logic internally, with
caching.
- The `mdns(_minimal)` module has been updated to the new priorities.
If you use your own NSS host modules, make sure to update your priorities
according to these rules:
- NSS modules which should be queried before `resolved` DNS resolution should
use mkBefore.
- NSS modules which should be queried after `resolved`, `files` and
`myhostname`, but before `dns` should use the default priority
- NSS modules which should come after `dns` should use mkAfter.
Declaring them as lists enables the concatenation, supporting
lib.mkBefore, lib.mkOrder, etc.
This is useful when you need to extend a service with a pre-start
script that needs to run as root.
See https://www.redhat.com/sysadmin/fedora-31-control-group-v2 for
details on why this is desirable, and how it impacts containers.
Users that need to keep using the old cgroup hierarchy can re-enable it
by setting `systemd.unifiedCgroupHierarchy` to `false`.
Well-known candidates not supporting that hierarchy, like docker and
hidepid=… will disable it automatically.
Fixes#73800
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
