As per the in-line comment, this is where distros should configure it.
Not via kernel command line parameters.
As found by looking at the implementation, while exploring the cause of
a bug on the Raspberry Pi 4, it was found that `cma=` on the command
line parameters will overwrite the values a device tree will have
configured for a given platform.
With this, the more recent 5.4 vendor kernel boots just fine on the
Raspberry Pi 4 using our common configuration.
This includes setting up everything for the mainline Raspberry Pi 4
image.
In fact, the only difference left in the Raspberry Pi 4-specific image
is the kernel from the vendor.
The service was failing with:
gunicorn[2192104]: [2020-12-31 13:35:28 +0000] [2192104] [ERROR] Exception in worker process
gunicorn[2192104]: Traceback (most recent call last):
gunicorn[2192104]: File "/nix/store/jmc14qf1sfnlhw27xyyj862ghkmdkj5a-python2.7-gunicorn-19.10.0/lib/python2.7/site-packages/gunicorn/arbiter.py", line 586, in spawn_worker
gunicorn[2192104]: worker.init_process()
gunicorn[2192104]: File "/nix/store/jmc14qf1sfnlhw27xyyj862ghkmdkj5a-python2.7-gunicorn-19.10.0/lib/python2.7/site-packages/gunicorn/workers/ggevent.py", line 196, in init_process
gunicorn[2192104]: self.patch()
gunicorn[2192104]: File "/nix/store/jmc14qf1sfnlhw27xyyj862ghkmdkj5a-python2.7-gunicorn-19.10.0/lib/python2.7/site-packages/gunicorn/workers/ggevent.py", line 65, in patch
gunicorn[2192104]: monkey.patch_all(subprocess=True)
gunicorn[2192104]: File "/nix/store/fysf67w3i8iv1hfvp536nl8jbzqyk1s7-python-2.7.18-env/lib/python2.7/site-packages/gevent/monkey.py", line 1160, in patch_all
gunicorn[2192104]: from gevent import events
gunicorn[2192104]: File "/nix/store/fysf67w3i8iv1hfvp536nl8jbzqyk1s7-python-2.7.18-env/lib/python2.7/site-packages/gevent/events.py", line 67, in <module>
gunicorn[2192104]: from zope.interface import Interface
gunicorn[2192104]: ImportError: No module named zope.interface
- Added an ExecPostStart to acme-$cert.service when webroot is defined to create the acme-challenge
directory and fix required permissions. Lego always tries to create .well-known and acme-challenge,
thus if any permissions in that tree are wrong it will crash and break cert renewal.
- acme-fixperms now configured with acme User and Group, however the script still runs as root. This
ensures the StateDirectories are owned by the acme user.
- Switched to list syntax for systemd options where multiple values are specified.
Instead of treating the sddm config a wall of text that doesn't allow us
to override anything, turn it into an attribute set.
We dump `extraConfig` and instead introduce `settings` that is merged
with the module defaults to provide the final configuration.
There is some additional noise in here due to nixpkgs-fmt.
* nixos/xmonad: xmonad config w/ghc+xmessage
When the "config" option isn't set, we use xmonad-with-packages to
provide xmonad with runtime access to an isolated ghc, ensuring it can
recompile and exec a user's local config (e.g. $HOME/.xmonad/xmonad.hs)
regardless of which ghc (if any) is on PATH.
When the "config" option is set, however, we compile a configured xmonad
executable upfront (during nixos-rebuild), and prior to this commit, it
was not provided with runtime access to an isolated ghc.
As a result, with the "config" option set, it was not possible
to recompile and exec a user's local config unless there was a
compatible version of ghc on PATH with the necessary packages (xmonad,
xmonad-contrib, etc.) in its package database. Adding such a ghc to
environment.systemPackages, e.g.
(haskellPackages.ghcWithPackages (ps: with ps; [xmonad xmonad-contrib]))
is problematic because it adds both ghc and an unconfigured xmonad to
PATH, e.g.
$ ls -l $(which xmonad ghc)
lrwxrwxrwx ... /run/current-system/sw/bin/ghc -> /nix/store/...-ghc-8.10.2-with-packages/bin/ghc
lrwxrwxrwx ... /run/current-system/sw/bin/xmonad -> /nix/store/...-ghc-8.10.2-with-packages/bin/xmonad
Having the unconfigured xmonad on PATH is particularly bad because
restarting xmonad will dump the user into the unconfigured version, and
if no local config exists (e.g. in $HOME/.xmonad/xmonad.hs), they'll be
left in this unconfigured state.
In this commmit, we give the configured xmonad runtime access to ghc
like xmonad-with-packages does for the unconfigured version. The aim
is to allow the user to switch between the nixos module's config and a
local config (e.g. $HOME/.xmonad/xmonad.hs) at will, so they can try out
config changes without performing a nixos-rebuild.
Since the xmonad on PATH is the configured executable, there's no
danger a user could unwittingly restart into the unconfigured version,
and because xmonad will refuse to recompile when no local config
exists, there's no danger a user could unwittingly recompile into an
unconfigured version.
Given that a local config exists, the recompile/restart behavior depends
on two factors:
- which entry point is used
* 'XMonad.xmonad' (default)
* 'XMonad.launch' (recommended in "config" option description)
- what operation is triggered (i.e. via mod+q)
* `spawn "xmonad --recompile && xmonad --restart"` (default)
* `restart "xmonad" True`
* custom function
If the default 'XMonad.xmonad' entrypoint and default mod+q operation
are used, hitting mod+q will compile and exec the local config, which
will remain in use until next time the display manager is restarted.
If the entrypoint is changed to 'XMonad.launch' but mod+q left with its
default operation, hitting mod+q will have no visible effect. The logs
(as seen by running `journalctl --identifier xmonad --follow`) will show
an error,
X Error of failed request: BadAccess (attempt to access private resource denied)
which indicates that the shell was unable to start xmonad because
another window manager is already running (namely, the nixos-configured
xmonad).
https://wiki.haskell.org/Xmonad/Frequently_asked_questions#X_Error_of_failed_request:_BadAccess_.28attempt_to_access_private_resource_denied.29
Changing the mod+q operation to `restart "xmonad" True` (as recommended
in the "config" option's description) will allow a restart of the
nixos-configured xmonad to be triggeredy by hitting mod+q.
Finally, if the entrypoint is 'XMonad.launch', mod+q has been
bound to `restart "xmonad" True` and another key bound to a custom
recompile/restart function (e.g. `compileRestart` as shown in the
"config" option example), the user can switch between the nixos module's
config and their local config, with the custom key switching to the
local config and mod+q switching back.
* nixos/xmonad: refactor let binding
* nixos/xmonad: refactor (eliminate duplicate code)
* nixos/xmonad: install man pages
Prior to this commit, man pages were not installed if the "config"
option was set.
* nixos/xmonad: comment grammar fixups
* nixos/xmonad: writeStateToFile in example config
Calling writeStateToFile prior to recompiling and restarting allows
state (workspaces, etc.) to be preserved across the restart.
* nixos/xmonad: add ivanbrennan to maintainers
* nixos/xmonad: adjust compileRestart example
* nixos/xmonad: add missing import to example config
