INIT platformio project #1
This commit is contained in:
vanyabeat
parent
fc1f245eb2
commit
591568e4e4
153 changed files with 2479 additions and 145148 deletions
478
Src/can.c
478
Src/can.c
|
|
@ -1,263 +1,215 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file can.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the CAN instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "can.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
CAN_HandleTypeDef hcan1;
|
||||
CAN_HandleTypeDef hcan2;
|
||||
|
||||
/* CAN1 init function */
|
||||
void MX_CAN1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN1_Init 0 */
|
||||
|
||||
/* USER CODE END CAN1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN1_Init 1 */
|
||||
|
||||
/* USER CODE END CAN1_Init 1 */
|
||||
hcan1.Instance = CAN1;
|
||||
hcan1.Init.Prescaler = 5;
|
||||
hcan1.Init.Mode = CAN_MODE_LOOPBACK;
|
||||
hcan1.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan1.Init.TimeSeg1 = CAN_BS1_7TQ;
|
||||
hcan1.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan1.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan1.Init.AutoBusOff = ENABLE;
|
||||
hcan1.Init.AutoWakeUp = DISABLE;
|
||||
hcan1.Init.AutoRetransmission = ENABLE;
|
||||
hcan1.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan1.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN1_Init 2 */
|
||||
/*##-2- Configure the CAN Filter ###########################################*/
|
||||
CAN_FilterTypeDef sFilterConfig;
|
||||
sFilterConfig.FilterBank = 0;
|
||||
sFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
|
||||
sFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
|
||||
sFilterConfig.FilterIdHigh = 0x0000;
|
||||
sFilterConfig.FilterIdLow = 0x0000;
|
||||
sFilterConfig.FilterMaskIdHigh = 0x0000;
|
||||
sFilterConfig.FilterMaskIdLow = 0x0000;
|
||||
sFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0;
|
||||
sFilterConfig.FilterActivation = ENABLE;
|
||||
sFilterConfig.SlaveStartFilterBank = 14;
|
||||
|
||||
if(HAL_CAN_ConfigFilter(&hcan1, &sFilterConfig) != HAL_OK)
|
||||
{
|
||||
/* Filter configuration Error */
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/*##-3- Start the CAN peripheral ###########################################*/
|
||||
if (HAL_CAN_Start(&hcan1) != HAL_OK)
|
||||
{
|
||||
/* Start Error */
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE END CAN1_Init 2 */
|
||||
|
||||
}
|
||||
/* CAN2 init function */
|
||||
void MX_CAN2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 0 */
|
||||
|
||||
/* USER CODE END CAN2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 1 */
|
||||
|
||||
/* USER CODE END CAN2_Init 1 */
|
||||
hcan2.Instance = CAN2;
|
||||
hcan2.Init.Prescaler = 5;
|
||||
hcan2.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan2.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan2.Init.TimeSeg1 = CAN_BS1_7TQ;
|
||||
hcan2.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan2.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan2.Init.AutoBusOff = ENABLE;
|
||||
hcan2.Init.AutoWakeUp = DISABLE;
|
||||
hcan2.Init.AutoRetransmission = ENABLE;
|
||||
hcan2.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan2.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN2_Init 2 */
|
||||
/*##-2- Configure the CAN Filter ###########################################*/
|
||||
CAN_FilterTypeDef sFilterConfig;
|
||||
sFilterConfig.FilterBank = 14;
|
||||
sFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
|
||||
sFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
|
||||
sFilterConfig.FilterIdHigh = 0x0000;
|
||||
sFilterConfig.FilterIdLow = 0x0000;
|
||||
sFilterConfig.FilterMaskIdHigh = 0x0000;
|
||||
sFilterConfig.FilterMaskIdLow = 0x0000;
|
||||
sFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0;
|
||||
sFilterConfig.FilterActivation = ENABLE;
|
||||
sFilterConfig.SlaveStartFilterBank = 14;
|
||||
|
||||
if(HAL_CAN_ConfigFilter(&hcan2, &sFilterConfig) != HAL_OK)
|
||||
{
|
||||
/* Filter configuration Error */
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/*##-3- Start the CAN peripheral ###########################################*/
|
||||
if (HAL_CAN_Start(&hcan2) != HAL_OK)
|
||||
{
|
||||
/* Start Error */
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE END CAN2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
static uint32_t HAL_RCC_CAN1_CLK_ENABLED=0;
|
||||
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 0 */
|
||||
/* CAN1 clock enable */
|
||||
HAL_RCC_CAN1_CLK_ENABLED++;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==1){
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
}
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**CAN1 GPIO Configuration
|
||||
PB8 ------> CAN1_RX
|
||||
PB9 ------> CAN1_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN CAN1_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 1 */
|
||||
}
|
||||
else if(canHandle->Instance==CAN2)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN2_MspInit 0 */
|
||||
/* CAN2 clock enable */
|
||||
__HAL_RCC_CAN2_CLK_ENABLE();
|
||||
HAL_RCC_CAN1_CLK_ENABLED++;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==1){
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
}
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**CAN2 GPIO Configuration
|
||||
PB12 ------> CAN2_RX
|
||||
PB13 ------> CAN2_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN CAN2_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN2_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
HAL_RCC_CAN1_CLK_ENABLED--;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==0){
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
}
|
||||
|
||||
/**CAN1 GPIO Configuration
|
||||
PB8 ------> CAN1_RX
|
||||
PB9 ------> CAN1_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
|
||||
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 1 */
|
||||
}
|
||||
else if(canHandle->Instance==CAN2)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_CAN2_CLK_DISABLE();
|
||||
HAL_RCC_CAN1_CLK_ENABLED--;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==0){
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
}
|
||||
|
||||
/**CAN2 GPIO Configuration
|
||||
PB12 ------> CAN2_RX
|
||||
PB13 ------> CAN2_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12|GPIO_PIN_13);
|
||||
|
||||
/* USER CODE BEGIN CAN2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN2_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file can.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the CAN instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2024 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "can.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
CAN_HandleTypeDef hcan1;
|
||||
CAN_HandleTypeDef hcan2;
|
||||
|
||||
/* CAN1 init function */
|
||||
void MX_CAN1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN1_Init 0 */
|
||||
|
||||
/* USER CODE END CAN1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN1_Init 1 */
|
||||
|
||||
/* USER CODE END CAN1_Init 1 */
|
||||
hcan1.Instance = CAN1;
|
||||
hcan1.Init.Prescaler = 5;
|
||||
hcan1.Init.Mode = CAN_MODE_LOOPBACK;
|
||||
hcan1.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan1.Init.TimeSeg1 = CAN_BS1_7TQ;
|
||||
hcan1.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan1.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan1.Init.AutoBusOff = ENABLE;
|
||||
hcan1.Init.AutoWakeUp = DISABLE;
|
||||
hcan1.Init.AutoRetransmission = ENABLE;
|
||||
hcan1.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan1.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN1_Init 2 */
|
||||
|
||||
/* USER CODE END CAN1_Init 2 */
|
||||
|
||||
}
|
||||
/* CAN2 init function */
|
||||
void MX_CAN2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 0 */
|
||||
|
||||
/* USER CODE END CAN2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 1 */
|
||||
|
||||
/* USER CODE END CAN2_Init 1 */
|
||||
hcan2.Instance = CAN2;
|
||||
hcan2.Init.Prescaler = 5;
|
||||
hcan2.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan2.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan2.Init.TimeSeg1 = CAN_BS1_7TQ;
|
||||
hcan2.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan2.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan2.Init.AutoBusOff = ENABLE;
|
||||
hcan2.Init.AutoWakeUp = DISABLE;
|
||||
hcan2.Init.AutoRetransmission = ENABLE;
|
||||
hcan2.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan2.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN2_Init 2 */
|
||||
|
||||
/* USER CODE END CAN2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
static uint32_t HAL_RCC_CAN1_CLK_ENABLED=0;
|
||||
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 0 */
|
||||
/* CAN1 clock enable */
|
||||
HAL_RCC_CAN1_CLK_ENABLED++;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==1){
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
}
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**CAN1 GPIO Configuration
|
||||
PB8 ------> CAN1_RX
|
||||
PB9 ------> CAN1_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN CAN1_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 1 */
|
||||
}
|
||||
else if(canHandle->Instance==CAN2)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN2_MspInit 0 */
|
||||
/* CAN2 clock enable */
|
||||
__HAL_RCC_CAN2_CLK_ENABLE();
|
||||
HAL_RCC_CAN1_CLK_ENABLED++;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==1){
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
}
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**CAN2 GPIO Configuration
|
||||
PB12 ------> CAN2_RX
|
||||
PB13 ------> CAN2_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN CAN2_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN2_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
HAL_RCC_CAN1_CLK_ENABLED--;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==0){
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
}
|
||||
|
||||
/**CAN1 GPIO Configuration
|
||||
PB8 ------> CAN1_RX
|
||||
PB9 ------> CAN1_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
|
||||
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 1 */
|
||||
}
|
||||
else if(canHandle->Instance==CAN2)
|
||||
{
|
||||
/* USER CODE BEGIN CAN2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_CAN2_CLK_DISABLE();
|
||||
HAL_RCC_CAN1_CLK_ENABLED--;
|
||||
if(HAL_RCC_CAN1_CLK_ENABLED==0){
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
}
|
||||
|
||||
/**CAN2 GPIO Configuration
|
||||
PB12 ------> CAN2_RX
|
||||
PB13 ------> CAN2_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12|GPIO_PIN_13);
|
||||
|
||||
/* USER CODE BEGIN CAN2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN2_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue