ADD persistent parameters (PID, ID), request-response model via CAN bus, Position Control

controller/fw/embed/include/reg_cah.h

@@ -0,0 +1,40 @@
+#ifndef REG_CAH_H_
+#define REG_CAH_H_
+
+#define APP_ADDR        0x0800400  // 16KB - Application
+#define ADDR_VAR        0x8040000
+
+
+#define REG_READ                0x07
+#define REG_WRITE               0x08
+
+
+/*               Startup    ID device          */
+#define START_ID               0x00
+
+/*              CAN REGISTER     ID       */
+#define REG_ID                  0x01
+#define REG_BAUDRATE            0x02
+
+#define REG_MOTOR_POSPID_Kp     0x30
+#define REG_MOTOR_POSPID_Ki     0x31
+#define REG_MOTOR_POSPID_Kd     0x32
+
+#define REG_MOTOR_VELPID_Kp     0x40
+#define REG_MOTOR_VELPID_Ki     0x41
+#define REG_MOTOR_VELPID_Kd     0x42
+
+#define REG_MOTOR_IMPPID_Kp     0x50
+#define REG_MOTOR_IMPPID_Kd     0x51
+
+#define REG_RESET               0x88
+#define REG_LED_BLINK           0x8B
+
+#define FOC_STATE               0x60
+
+#define MOTOR_VELOCITY          0x70
+#define MOTOR_ENABLED           0x71
+#define MOTOR_ANGLE             0x72
+#define MOTOR_TORQUE            0x73
+
+#endif  // REG_CAH_H_