Changes int project
1. InitCode for modules generated to different files 2. Added correct interrupt stucture PWM-ADC-MainCode 3. PWM freq and BaseTime freq defined using DEFINES in main.c
This commit is contained in:
on4ip84
parent
d1674a69e7
commit
ee1319b10e
26 changed files with 1380 additions and 749 deletions
224
Src/adc.c
Normal file
224
Src/adc.c
Normal file
|
|
@ -0,0 +1,224 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file adc.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the ADC instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "adc.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* ADC1 init function */
|
||||
void MX_ADC1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN ADC1_Init 0 */
|
||||
|
||||
/* USER CODE END ADC1_Init 0 */
|
||||
|
||||
LL_ADC_InitTypeDef ADC_InitStruct = {0};
|
||||
LL_ADC_REG_InitTypeDef ADC_REG_InitStruct = {0};
|
||||
LL_ADC_CommonInitTypeDef ADC_CommonInitStruct = {0};
|
||||
LL_ADC_INJ_InitTypeDef ADC_INJ_InitStruct = {0};
|
||||
|
||||
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* Peripheral clock enable */
|
||||
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC1);
|
||||
|
||||
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
|
||||
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB);
|
||||
/**ADC1 GPIO Configuration
|
||||
PA4 ------> ADC1_IN4
|
||||
PA5 ------> ADC1_IN5
|
||||
PA6 ------> ADC1_IN6
|
||||
PB0 ------> ADC1_IN8
|
||||
PB1 ------> ADC1_IN9
|
||||
*/
|
||||
GPIO_InitStruct.Pin = LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
||||
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = LL_GPIO_PIN_0|LL_GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
||||
LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC1_Init 1 */
|
||||
|
||||
/* USER CODE END ADC1_Init 1 */
|
||||
|
||||
/** Common config
|
||||
*/
|
||||
ADC_InitStruct.Resolution = LL_ADC_RESOLUTION_12B;
|
||||
ADC_InitStruct.DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
|
||||
ADC_InitStruct.SequencersScanMode = LL_ADC_SEQ_SCAN_ENABLE;
|
||||
LL_ADC_Init(ADC1, &ADC_InitStruct);
|
||||
ADC_REG_InitStruct.TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
|
||||
ADC_REG_InitStruct.SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE;
|
||||
ADC_REG_InitStruct.SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
|
||||
ADC_REG_InitStruct.ContinuousMode = LL_ADC_REG_CONV_SINGLE;
|
||||
ADC_REG_InitStruct.DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE;
|
||||
LL_ADC_REG_Init(ADC1, &ADC_REG_InitStruct);
|
||||
LL_ADC_REG_SetFlagEndOfConversion(ADC1, LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV);
|
||||
ADC_CommonInitStruct.CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
ADC_CommonInitStruct.Multimode = LL_ADC_MULTI_INDEPENDENT;
|
||||
LL_ADC_CommonInit(__LL_ADC_COMMON_INSTANCE(ADC1), &ADC_CommonInitStruct);
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
LL_ADC_REG_SetSequencerRanks(ADC1, LL_ADC_REG_RANK_1, LL_ADC_CHANNEL_4);
|
||||
LL_ADC_SetChannelSamplingTime(ADC1, LL_ADC_CHANNEL_4, LL_ADC_SAMPLINGTIME_3CYCLES);
|
||||
|
||||
/** Configure Injected Channel
|
||||
*/
|
||||
ADC_INJ_InitStruct.TriggerSource = LL_ADC_INJ_TRIG_EXT_TIM1_TRGO;
|
||||
ADC_INJ_InitStruct.SequencerLength = LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS;
|
||||
ADC_INJ_InitStruct.SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE;
|
||||
ADC_INJ_InitStruct.TrigAuto = LL_ADC_INJ_TRIG_INDEPENDENT;
|
||||
LL_ADC_INJ_Init(ADC1, &ADC_INJ_InitStruct);
|
||||
LL_ADC_INJ_SetSequencerRanks(ADC1, LL_ADC_INJ_RANK_1, LL_ADC_CHANNEL_8);
|
||||
LL_ADC_SetChannelSamplingTime(ADC1, LL_ADC_CHANNEL_8, LL_ADC_SAMPLINGTIME_3CYCLES);
|
||||
LL_ADC_INJ_SetOffset(ADC1, LL_ADC_INJ_RANK_1, 0);
|
||||
LL_ADC_INJ_StartConversionExtTrig(ADC1, LL_ADC_INJ_TRIG_EXT_RISING);
|
||||
|
||||
/** Configure Injected Channel
|
||||
*/
|
||||
LL_ADC_INJ_Init(ADC1, &ADC_INJ_InitStruct);
|
||||
LL_ADC_INJ_SetSequencerRanks(ADC1, LL_ADC_INJ_RANK_2, LL_ADC_CHANNEL_9);
|
||||
LL_ADC_SetChannelSamplingTime(ADC1, LL_ADC_CHANNEL_9, LL_ADC_SAMPLINGTIME_3CYCLES);
|
||||
LL_ADC_INJ_SetOffset(ADC1, LL_ADC_INJ_RANK_2, 0);
|
||||
LL_ADC_INJ_StartConversionExtTrig(ADC1, LL_ADC_INJ_TRIG_EXT_RISING);
|
||||
/* USER CODE BEGIN ADC1_Init 2 */
|
||||
|
||||
/* USER CODE END ADC1_Init 2 */
|
||||
|
||||
}
|
||||
/* ADC2 init function */
|
||||
void MX_ADC2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN ADC2_Init 0 */
|
||||
|
||||
/* USER CODE END ADC2_Init 0 */
|
||||
|
||||
LL_ADC_InitTypeDef ADC_InitStruct = {0};
|
||||
LL_ADC_REG_InitTypeDef ADC_REG_InitStruct = {0};
|
||||
|
||||
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* Peripheral clock enable */
|
||||
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC2);
|
||||
|
||||
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
|
||||
/**ADC2 GPIO Configuration
|
||||
PC3 ------> ADC2_IN13
|
||||
PC4 ------> ADC2_IN14
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = LL_GPIO_PIN_3|LL_GPIO_PIN_4|LL_GPIO_PIN_5;
|
||||
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
||||
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC2_Init 1 */
|
||||
|
||||
/* USER CODE END ADC2_Init 1 */
|
||||
|
||||
/** Common config
|
||||
*/
|
||||
ADC_InitStruct.Resolution = LL_ADC_RESOLUTION_12B;
|
||||
ADC_InitStruct.DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
|
||||
ADC_InitStruct.SequencersScanMode = LL_ADC_SEQ_SCAN_DISABLE;
|
||||
LL_ADC_Init(ADC2, &ADC_InitStruct);
|
||||
ADC_REG_InitStruct.TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
|
||||
ADC_REG_InitStruct.SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE;
|
||||
ADC_REG_InitStruct.SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
|
||||
ADC_REG_InitStruct.ContinuousMode = LL_ADC_REG_CONV_SINGLE;
|
||||
ADC_REG_InitStruct.DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE;
|
||||
LL_ADC_REG_Init(ADC2, &ADC_REG_InitStruct);
|
||||
LL_ADC_REG_SetFlagEndOfConversion(ADC2, LL_ADC_REG_FLAG_EOC_UNITARY_CONV);
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
LL_ADC_REG_SetSequencerRanks(ADC2, LL_ADC_REG_RANK_1, LL_ADC_CHANNEL_15);
|
||||
LL_ADC_SetChannelSamplingTime(ADC2, LL_ADC_CHANNEL_15, LL_ADC_SAMPLINGTIME_3CYCLES);
|
||||
/* USER CODE BEGIN ADC2_Init 2 */
|
||||
|
||||
/* USER CODE END ADC2_Init 2 */
|
||||
|
||||
}
|
||||
/* ADC3 init function */
|
||||
void MX_ADC3_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN ADC3_Init 0 */
|
||||
|
||||
/* USER CODE END ADC3_Init 0 */
|
||||
|
||||
LL_ADC_InitTypeDef ADC_InitStruct = {0};
|
||||
LL_ADC_REG_InitTypeDef ADC_REG_InitStruct = {0};
|
||||
|
||||
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* Peripheral clock enable */
|
||||
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC3);
|
||||
|
||||
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC);
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
*/
|
||||
GPIO_InitStruct.Pin = LL_GPIO_PIN_0|LL_GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = LL_GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
||||
LL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC3_Init 1 */
|
||||
|
||||
/* USER CODE END ADC3_Init 1 */
|
||||
|
||||
/** Common config
|
||||
*/
|
||||
ADC_InitStruct.Resolution = LL_ADC_RESOLUTION_12B;
|
||||
ADC_InitStruct.DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
|
||||
ADC_InitStruct.SequencersScanMode = LL_ADC_SEQ_SCAN_DISABLE;
|
||||
LL_ADC_Init(ADC3, &ADC_InitStruct);
|
||||
ADC_REG_InitStruct.TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
|
||||
ADC_REG_InitStruct.SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE;
|
||||
ADC_REG_InitStruct.SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
|
||||
ADC_REG_InitStruct.ContinuousMode = LL_ADC_REG_CONV_SINGLE;
|
||||
ADC_REG_InitStruct.DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE;
|
||||
LL_ADC_REG_Init(ADC3, &ADC_REG_InitStruct);
|
||||
LL_ADC_REG_SetFlagEndOfConversion(ADC3, LL_ADC_REG_FLAG_EOC_UNITARY_CONV);
|
||||
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
LL_ADC_REG_SetSequencerRanks(ADC3, LL_ADC_REG_RANK_1, LL_ADC_CHANNEL_10);
|
||||
LL_ADC_SetChannelSamplingTime(ADC3, LL_ADC_CHANNEL_10, LL_ADC_SAMPLINGTIME_3CYCLES);
|
||||
/* USER CODE BEGIN ADC3_Init 2 */
|
||||
|
||||
/* USER CODE END ADC3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
Loading…
Add table
Add a link
Reference in a new issue